Proaim 18ft Jib Package


  • Proaim 18ft Jib Crane with LCD Arm
  • Jib Stand
  • 12volt Jr.Pan Tilt Head

The Unbeatable Featured Quality of our Jib Arm made of three RIBBED SECTION that makes it stronger to bear the weight of Pan Tilt Head and cameras weighing upto 10 lbs without any jerks.

It has Adjustment Metal Wire System that makes the Jib Arm Stable, smooth without bend and jerks. This is really an ideal solution for all of the start up, low budget film-makers and production companies.

You no longer need to spend thousands on a track & dolly, jib-arm etc

You can create an awe-inspired footage from a variety of angles with this Jib. This Film Equipment is a Super Smooth linkage system you will never get any binding, jerking or slippage while operating this jib crane.

Camera weighing Capacity: upto 10 lbs when using Jib with Pan-Tilt Head and upto 15 lbs when using Jib only.

  • Fully Ribbed Section Makes the Jib Stronger to bear the camera weight upto 15 lbs without Head and 10 lbs when using with head.
  • Adjustment Metal Wire System that can bear the weight of dv/hdv heavy cameras without any bending problem This feature makes our PROAIM 18' Jib Arm very stable and rock-hard.
  • Three Ribbed Arm Section for maximum stability and minimum wobble.
  • Each jib comes complete with their own stand - very useful as no expensive sturdy tripod is needed!
  • Stronger weight bar to easily achieve perfect balance
  • Uses standard household style exercise weights. (1 inch hole)
  • Breaks down into five easily transported sections
  • Fixed camera angle achieved while controlling handle is locked with a Pin.
  • Triangular boom for increased strength
  • Easily attached to the Jib Stand
  • All aluminum construction
  • Tilting movements achieved with the controlling handle.
  • Portable and very easy to carry with carrying case.
  • Can be assembled by one person without any fuss in a matter of minutes-Weight of Jib Stand : 10 lbs
  • Can be used without pan tilt Head
  • Jib Arm made of three RIBBED SECTION that makes it stronger

For cameras weighing upto 15 lbs With 12V Pan & Tilt Motors This is a smaller Version of PROAIM PAN TILT HEADsuitable for videography with the smaller DV/HDV/DSLR Cameras. The Jr. Pan Tilt Head works on 12volt power and comes with 12V Motors for Panning and Tilting shootings. It easily accepts external 12 volt power through a 4pin XLR cable. This is really an ideal solution for all of the start up, low budget film-makers and production companies.....

This Head pans and tilts the cameras smoothly and accurately with precise, proportional joystick control. The creative movements from the PROAIM™ Jr. PAN TILT HEAD can be fully utilized by using it with crane arms, tripods or any other remote operating situations.

This Head comes with remote head that controls the pan tilt movements of this head and allows you to create extraordinary videos.

The head frame, gears & joystick controller are very solid. The frame is made of a high grade metal. The XLR cables are built in to the motor and blends well with the rest of the frame. the gears on the head are sturdy and solid quality.The head is wrapped up in plastic which helps protect the finish.

This kit inlcudes :

  • PROAIM Jr.Pan Tilt Head with Joystick control and AC Adapter
  • 7mtr Long Cable
  • 1.5 mtr Long Cable
  • Universal Adapter
  • Travelling Bag and Grey Foam Packing


The PROAIM™ PAN TILT HEAD comes with Joystick control system, 23 feet Long Cable and AC Adapter.

  • The joystick may be operated in the handheld position, from a flat surface such as a tabletop, or attached to the boom arm of Jib.
  • For Outdoor shooting, you can use 1.5mtr long 3pinXLR cable with your 12volt of Brick or Car


  • This head has 360 degree end less tilting movement and 360 degree panning movement with reversal point.
  • Speed is variable and is easily controlled and adjusted by "Speed" and "Dead Spot" potentiometers on the control unit.
  • The Deadspot control determines the center band of the joystick where no motion will occur. This way you can set it to your abilitites and insure no crossover to the other axis when not wanted.
  • You can use this head for outdoors shoot occasionally but with some sort of protection cover i.e rain cover or fiber sheet.
  • The Head comes Carrying case with custom fit packing.
  • You receive the Pan Tilt Head with assembled wiring with Top and Bottom Motor. You just need to Install the Power out to head (3 pin connector) and 12 volt DC power (4 pin XLR) in rear of joystick box.


  • Maximum camera weight: 15 lbs.
  • Pan movement: 360 degrees
  • Tilt movement: 360 degrees 
  • Variable-controlled speed from 6 degrees/sec (low speed) to 51 degrees/sec (high speed) 
  • Precision machined parts with the highest standards of industrial grade electronic components 
  • AC Adapter input - AC 100 - 240V ; output - DC 12V -2A
  • Has two high torque, coreless DC motors that rotates (pans) and tilts the head 360 degrees.
  • It takes 2 minutes to pan at 360 degrees at its slowest speed without stopping and 7 seconds at its highest speed.
  • It will consistently go at its slowest speed without stopping.
  • The camera platform height can be adjusted at any point.

Jib Stand Technical Info

  • Made of Aluminum Black anodized
  • Bbase spread: 32"- 48"
  • Height adjustment: 44"-80"
  • Completely collapsed height : 46"
  • Makes the jib-arm stable & solid as a rock
  • Safety Pin for Secure Pole
  • Weight capacity of the stand is 200lb (90kg)